SHULIY GROUP

Email:info@bestshuliy.com

WhatsApp/Tel:+86 17319793602

  • Peanut processing machine manufacturer
  • peanut butter processing machine

An experienced Peanut roaster machine says

Post by adminOct-10,2018

    Peanut roaster machine is one of the main products of our company. The company has perfect management system, superb technical ability and 100% product service. Therefore, it is the most popular enterprise for customers. I will introduce peanut roaster machine here. Precautions when training the machine:

    1. Requirements for peanut roaster machines.

    1) Clean shell and high productivity. For peanut sheller machine with cleaning device, it also requires high cleanliness.

    2) Low loss rate and small breakage rate.

    3) Simple structure, reliable use, convenient adjustment, low power consumption, certain versatility, and can remove a variety of crops to improve the utilization rate of the implement.

Peanut roaster machine Peanut roaster machine

 

    2. Requirements for peanut roaster machine(pectin). Peanuts are suitable for dry and wet, too dry, the rate of breakage is high; over-wet affects work efficiency. Peanuts stored in rural areas are generally dry, so that they are wet and dry. The following methods are suitable.

    1) Unshelling in winter. Spray 10kg of skinned fruit with 10kg of warm water before shelling, and cover it with plastic film for about 10 hours, then cool it in the sun for about 1 hour to start shelling. Plastics for other seasons. The film cover time is about 6 hours, the rest is the same.

    2) Dilute the peanuts (pectin) in a large pool. Immediately after immersion, remove and cover with plastic film for about 1 day, then cool in the sun. After drying and drying, start shelling.

    3, the requirements of the voltage and the choice of the workplace. Peanut roaster machine single-phase motor should work normally, the voltage needs to reach its rated voltage. In rural areas, there is only one transformer in a village, and the households are scattered and added, and the wires used. And the circuit is not very standard, causing the user far from the transformer to have insufficient voltage. Therefore, the workplace should be close to the transformer.

Leave A Comment